The top block of the machine page in the report containing some important values:

Components Checked: Percent how many of possible components are checked with this machine e.g. the AOI is placed after SMT soldering and cannot check THT components. If some of the components in shadow of other components the value is lower then 100%.

Covered Components: This is the positive result with higher coverage value then 0, this value gives you a short overview like a table filter >0.

Pins checked: Maybe the machine cannot check all pins, the percent value is depending on the machine type and analysis results e.g. a AOI machine cannot check cooling pins under the body of the packages.

Covered Pins: This is the positive result with higher coverage value then 0 for the pins.

Coverage Presence/Polarity/Value/Soldering: The overview value for all results or "-" if the machine cannot check this value.